Words start with letter ‘L’

Check any word shown with letter *L or choose below the wanted one and see the definition

Laminar flow – A type of flow where fluid moves along pipes in layers.

Limited rotary hydraulic motor –  A hydraulic rotary motor having limited motion.

Line – A tube, pipe or hose for conducting fluid.

Linear hydraulic motor – A fluid power cylinder providing reciprocating motion.

Lip seal – A sealing device which has a flexible sealing projection.

Liquid level control – A device which controls the liquid level by a float switch or other means.

Liter (L) – A unit of volume. 1 l (liter (litre) = 1000cm³ (cubic centimetres) = 61 in³ (cubic inches) approximately = 0.264 U.S. gallons approximately.

Liter per minute – A unit of volumetric flow rate. 1 l/min (litre per minute) = 10-3 m³ / min (cubic meters per minute) = 1.02 in³/s (cubic inches per second) = 0.264 U.S. gal/min (gallons per minute).

Liter per revolution – A unit of volumetric capacity. 1 l/rev (litre (litre) per revolution) 10-3 m³/rev (cubic meters per revolution) = 61.0 in³/rev (cubic inches per revolution).

Load dividing valve – A pressure control valve used to proportion pressure between two pumps in series.

L type hydraulic filter – A hydraulic filter in which the inlet and outlet port axis are at right angles, and the filter element axis is parallel to either port axis.

Lubricant seal – A sealing device which uses lubricant as a sealing barrier.

Lubricator – A device which adds controlled or method amounts of lubricant into a fluid power system.

Words shown with letter *L or choose the wanted one and see the definition

The post is filled under Hydraulic Glossary

Have a comment about this topic! Share it here

Hydraulicstroubleshooter
Logo