Words start with letter ‘T’

Check word shown with letter *T or choose below the wanted one and see the definition.

Tandem cylinder – special form of construction that two cylinders are connected together and act upon one and the same piston rod. Used when large force required and there is not room for a cylinder with the necessary diameter.

Tank – A reservoir for the storage of fluid in a fluid power system.

Tapered pipe thread – Pipe threads in which the pitch diameter follows a helical cone to provide interference in tightening.

Telescoping cylinder – A cylinder with multiple rod segments, the largest cross section is push out first and those with the smallest diameter last.

Throttle valve – is a flow control valve, the simple control flow valve is the throttling valve.

Torricelli’s Theorem – The liquid velocity at an outlet discharging into the free atmosphere is proportional to the square root of the head.

Torr – A unit of absolute pressure less than atmospheric pressure, equivalent to 1mm. Hg. It is used primarily to describe a vacuum 25 mm. Hg absolute or less.

Torque – Hydraulic torque is a turning effort or twisting force. An example which for me it was conclusive a 10 kg-m torque is produce when a force of 10 kg is apply to a 1 m long wrench.

Tube – A line whose size it its outsize diameter. Tube is available in varied wall thicknesses.

Turbulent flow – Up to a certain velocity, liquids move along the pipes in layers. If the velocity of flow is increase at the critical point the flow changes and almost spinning around and get turbulent flow.

Type of flow – The type of flow is an important factor when considering energy loss within hydraulic system.

Check word shown with letter *T or choose below the wanted one and see the definition.

The post is filled under Hydraulic Glossary

Have a comment about this topic! Share it here

Hydraulicstroubleshooter
Logo