
Hydraulic Glossary Letter D
Words start with letter ‘D’
Check any word shown or choose below the wanted one and see the definition
Darcy’s Formula – A formula used to determine the pressure drop due to flow friction through a pipe.
Separation by chemical change into constituent parts, elements, or different compounds. More specifically related fluid and seal chemical changes. The materials affected are primarily organic in nature. The products of change may be introduced into the system as contamination.
Decontamination – The process of removing unwanted material or substance; the reduction of contamination to an acceptable level.
Density – A unit of mass per unit volume usually expressed in kg/l (kilograms per litre) 1 kg/l = 0.036 lb/in³.
Detent valve position – Is a type of hydraulic or pneumatic valve used to control the flow of fluid (liquid or gas) in a specific direction and lock it into a fixed position when not controlled.
Diagram – In order to check the function of a hydraulic machine we need a diagram. Consequently there are various type of drawings consists of a number of symbols. To ensure that everyone can read the symbols, international standard symbols are use.
Diaphragm hydropneumatic accumulator – A hydropneumatic accumulator in which the liquid and gas are separated by a flexible diaphragm.
Differential indicator – An indicator which signals the difference in pressure at two points.
Differential pressure – The difference in pressure between any two points of a system or a component.
Differential pressure port – A port(s) which provides a passage to the upstream and downstream sides of a component.
Differential unloading relief valve – Differential unloading relief valve system is used to charge the accumulator to its maximum pressure through the relief valve and hold that pressure until its required.
Digital – Of or pertaining to the general class of fluidic devices or circuits whose output varies in discrete steps (ie, pulses or “on-off” characteristics).
Directional control valve – dcv – are use to start, stop and change the direction of fluid flowing through a hydraulic system.
Discharge port – A port which provides a passage for fluid power to the system.
Disposable hydraulic filter – A hydraulic filter which is intended to be discarded and replaced after one service cycle.
Dissolved air – Air which is dispersed at a molecular level in hydraulic fluid to form a single phase.
Dissolved water – Water which is dispersed at a molecular level in the hydraulic fluid to form a single phase.
Double acting cylinder – A cylinder in which fluid force can be applied to the movable element in either direction.
Double rod cylinder – A cylinder with a single piston and a piston rod extending from each end.
Drain line – A line returning leakage fluid independently to the reservoir or vented manifold.
Drain port – A port for removal of fluid from a component, open to atmosphere, or connected to an unrestricted line.
Dual hydraulic filter – A hydraulic filter having two filter elements in parallel.
Dual stroke cylinder – A cylinder combination which provides two working strokes
Duplex hydraulic cylinder – An assembly of two hydraulic filters with valving for selection of either or both filters.
Dwell phase – The phase of cycle where a specified motion is stopped for a pre-determined length of time.
Dynamic seal – A sealing device used between parts that have relative motion.
The post is filled under Hydraulic Glossary
