Words start with letter ‘C’

Check any word shown or choose below the wanted one and see the definition

Case drain line – A line conducting fluid from a pump or motor housing to reservoir or hydraulic tank.

Cavitation – The phenomenon of cavitation is the formation of gaps or voids in a fluid flow creating high local fluid velocity which causes damage on the surface of components such as gear teeth, vanes, and pistons leading to premature pump failure.

Celsius – A temperature scale 0 Celsius (or 0 Centigrade) is the freezing point of water.

Center valve position – The selective mid-position in a directional control valve.

Centrifugal hydraulic pump – A hydraulic pump which produces fluid velocity and converts it to pressure head.

Centrifugal Separator – A separator that removes unmixable fluid and solid contaminants that have a different specific gravity than the fluid being purified by accelerating the fluid in a circular path and using the radial acceleration component to isolate these contaminants.

Channel – A fluid passage, the length of which is large with respect to its cross-sectional area.

Charge pressure – The pressure at which replenishing fluid is forced into fluid power system.

Circuit -Comprises of a number of symbols interconnected by lines

Clevis – An “U” shaped mounting device which contains a common pin hole at right angle or normal to the axis of symmetry through each extension. A clevis usually connects with an eye.

Closure fitting – A cap or a plug.

Clutch – the clutch mechanism enables the drum of the  winches to rotate freely. Is a device comprises a cylinder trigger  a fork that connect and disconnect a driving unit usually a drum shaft.

Compartment – A space within the base, frame or column of the equipment.

Compress air – Air at any pressure greater than atmospheric pressure.

Compressibility – The change in volume of a unit volume of a fluid when subjected to a unit change of pressure.

Conductor – A component whose primary function is to contain and direct fluid.

Contaminant – Any material or substance which is unwanted or adversely affects the fluid power system to components, or both.

Contamination level – A quantitative term specifying the degree of contamination.

Control – A device used to regulate the function of a component or system.

Control port – A port which provides passage for a control signal.

Cooler – A heat exchanger which removes heat from a fluid.

Corrosion – The chemical change in the mechanical elements caused by the interaction of fluid or contaminants, or both. More specifically related to chemical changes in metals. The products of change may be introduced into the system as generated particulate contamination.

Counterbalance valve – A pressure control valve which maintains back pressure to prevent a load from falling.

Cracking pressure– The pressure at which a pressure operated valve begins to pass fluid.

Cross fitting – A fitting with four ports arranged in pairs, each pair on one axis, and the axis at right angles.

Cushioning –  Is use to slow down the piston as it come nearer its end positions, to prevent it from striking with great force the cover as it extends and retracts.

Cutaway diagram – A drawing showing principle internal parts of all components, controls and actuating mechanisms, all interconnecting lines and function of individual components.

Cutaway symbol – A symbol showing principal internal parts, controls and actuating mechanisms, interconnecting lines and functions of a component.

Cycle – A single complete operation consisting of progressive phases starting and ending at the neutral position.

Cylinder – A device which converts fluid power into linear mechanical force and motion. It usually consists of a movable element such as a piston and piston rod, plunger or ram, operating within a cylindrical bore.

Cylinder control – A control in which a fluid cylinder is the actuating device.

Cylinder cushion – A device to reduce the impact of the piston against the cap or head of the cylinder.

Cylinder port – A port which provides a passage to or from an actuator.

The post is filled under Hydraulic Glossary

Have a word start with letter C want to know! Share here!

We will be happy to hear your thoughts

Leave a reply

Hydraulicstroubleshooter
Logo