Ward-Leonard principle for cargo cranes

cargo cranes principle

Cargo cranes principle

The Ward-Leonard system is an older but important electrical drive-control system. Shipbuilders and crane manufacturers widely used it in marine cargo cranes, winches, hoists and other heavy-duty lifting equipment.

Its main purpose is to provide smooth speed control, high starting torque, easy reversing and controlled braking of an electric motor.

This cargo cranes principle it was particularly useful for deck cranes because lifting and lowering heavy loads requires precise control over motor speed and torque.

Working principle

luffing winch driven by AC motor

The Ward-Leonard system uses a motor-generator arrangement to control the speed of a DC motor. It consists of three main machines:

  1. AC driving motor – runs at approximately constant speed.
  2. DC generator – mechanically coupled to the AC motor.
  3. DC crane motor – receives variable DC voltage from the generator and drives the crane mechanism.

For more information about the working principle of this Tsuji Deck Crane will be explained further. Is based on Ward-Leonard principle.

Braking in Ward-Leonard cargo cranes

There are two important braking methods:

Electrical braking

  • Dynamic braking: The motor acts as a generator and sends electrical energy to braking resistors, which convert the energy into heat.
  • Regenerative braking: The motor acts as a generator and feeds electrical energy back into the ship’s electrical supply, provided the system supports regenerative operation.

Mechanical braking

  • An electromagnetic or electro hydraulic brake holds the load when the motor stops.
  • It is normally spring-applied and electrically released, so it applies when power fails.

An important point about this cargo cranes principle: the mechanical brake is essential for safely holding a suspended cargo load. Electrical braking alone should not be relied upon for holding it.

To Summarize
  • Ward-Leonard is a variable-voltage DC motor speed-control system.;
  • It consists of an AC motor, DC generator and DC crane motor.
  • Speed is controlled by varying the DC generator field excitation.
  • Direction is reversed by reversing the generator output polarity.
  • It provides smooth acceleration, high starting torque and controlled lowering.

Have a comment about this topic! Share it here!

The post is fill under Troubleshooter page

Troubleshooter
Troubleshooter

I'm the technical person behind the website hydraulicstroubleshooting.com. My website is my portfolio where a share most of my experiences and know-how gain so far in electro-hydraulic systems.

We will be happy to hear your thoughts

Leave a reply

Hydraulicstroubleshooter
Logo