Tachometer

A tachometer is an instrument used to measure the rotational speed of a motor, engine, shaft, or other rotating component. Its measurement is normally expressed in RPM (revolutions per minute).

On cargo ships, particularly on ships equipped with deck cranes, heavy-lift cranes, and electro-hydraulic cargo cranes, tachometers are important for monitoring the speed of rotating machinery and controlling crane movements through the speed-control system.

Types of tachometer used in marine cranes

✅Magnetic pickup tachometer

  • Detects the passing teeth of a rotating gear.
  • Produces electrical pulses.
  • The control system calculates RPM from pulse frequency.
  • Common in industrial rotating machinery.

✅Optical tachometer

  • Uses a light beam and reflective mark.
  • Measures rotational speed without physical contact.
  • More common for testing and maintenance than permanent crane installations.

✅Encoder (rotary encoder)

  • Produces electrical pulses corresponding to shaft rotation.
  • Can measure speed, direction, and position.
  • Used in modern electrically controlled crane systems.

✅Tachogenerator

  • A small generator connected mechanically to a motor shaft.
  • Produces a voltage proportional to rotational speed.
  • Historically common in motor speed-control systems.

The jobs can be inspections or some small defects. However when troubleshooting it is often the smallest and most insignificant-looking defects that cause the biggest headaches

A crane tachometer for hoisting motor work:

  1. The crane operator moves the hoisting lever.
  2. The electrical or hydraulic control system activates the hoisting motor.
  3. The motor starts rotating.
  4. The tachometer sensor detects the shaft rotation.
  5. The sensor sends an electrical signal to the crane controller.
  6. The controller uses this feedback to regulate motor speed.

Therefore in the past, marine cargo cranes commonly used DC tachogenerators to convert motor rotation into an analog voltage proportional to RPM. Nowadays modern cranes primarily use electronic speed sensors and rotary encoders to provide digital speed and position feedback to an advanced motor-control systems.

tachometer replaced by angle encoder

Have a comment about this topic! Share it here!

The post is filled under Hydraulic-basics

Troubleshooter
Troubleshooter

I'm the technical person behind the website hydraulicstroubleshooting.com. My website is my portfolio where a share most of my experiences and know-how gain so far in electro-hydraulic systems.

We will be happy to hear your thoughts

Leave a reply

Hydraulicstroubleshooter
Logo