Windlass Drive
The anchor and mooring windlass is a deck machinery assembly designed to handle the vessel’s anchor and anchor chain, as well as mooring lines during anchoring and mooring operations.
Description of windlass schematic
The system comprises two independently operated units: an anchor-handling unit and a mooring unit, both powered by a common electric drive motor (M). The motor transmits torque through a flexible coupling (F.C.) to a reduction gearbox.
The gearbox incorporates a worm gear set as the first reduction stage, followed by a series of spur gears (G1–G4) mounted on parallel shafts. This gear arrangement reduces the motor speed and increases the output torque required for anchor handling and mooring operations.
Application of anchor and mooring windlass
Dog clutches (D.C.) allow the operator to engage or disengage each unit independently. The anchor-handling unit drives the chain wheel (wildcat), which engages the anchor chain during lowering and weighing anchor. A manually operated band brake (B.B.) controls chain payout and restrains the anchor during handling operations.
The mooring unit drives the mooring drum, which handles the vessel’s mooring lines during berthing and departure operations. The respective disengagement mechanisms allow the operator to disconnect the working elements from the drive train when required.
This arrangement enables the independent operation of the anchor windlass and mooring winch through a common drive system.

The schematic shows the main functional components:
- Anchor Unit
- Mooring Unit
- Electric drive motor
- Flexible coupling
- Gearboxes
- Dog clutches
- Anchor chain wheel (wildcat)
- Manual band brake
- Mooring rope drum
Have a comment about this topic! Share it here!
The post is filled under Hydraulic Diagram
