Function of Anchor and Mooring Windlass

anchor and mooring windlass dog clutches

✅I will share information about anchor and mooring windlass

The anchor and mooring windlass is a deck machinery assembly designed to handle the vessel’s anchor and anchor chain, including lowering and weighing anchor, as well as deploying and recovering mooring lines during mooring operations.

anchor and mooring windlass clutch arrangement
anchor and mooring windlass clutch arrangement

Technical description of windlass

The anchor and mooring windlass is a combined mechanical assembly consisting of two separate units:

  • Anchor handling unit
  • Mooring unit

A common drive system supplies power to both units through independently operated dog clutches.

The arrangement comprises an electric drive motor (M), connected to the gearbox input shaft through a flexible coupling (F.C.)

The first reduction stage consists of a worm gear arrangement. The worm wheel (W.W.) is rigidly mount on shaft II, which also carries the spur gear (G1). Gear G1 meshes with gear G2 that is mount on the same shaft as spur gear G3. Gear G3 then drives gear G4, transmitting torque to the dog clutches (D.C.) through the associated shafts.

The dog clutches allow the anchor and mooring units to be engaged or disengaged independently, enabling each unit to operate separately.

Each chain wheel (wildcat) shaft incorporates a manually operated band brake (B.B.) to control anchor chain payout and secure the anchor during handling operations.

The wildcat engages and drives the anchor chain, while the mooring drum handles the mooring rope. The operator can use the respective disengagement mechanisms to disconnect either working element from the drive train, allowing independent operation of the two units.

This arrangement allows independent operation of the mooring drum and the anchor wildcat, depending on the selected clutch configuration.

Troubleshooter jobs, good and mad that you went through.Do you have A Great Story About it? Write and share them here.

Application of anchor windlass

On modern vessels, a three-speed, pole-changing electric motor with an integrated electromagnetic brake typically drives the windlass. The motor operates from a three-phase, 380/400 V, 50 Hz AC power supply.

Some vessels use a DC electric motor as an alternative drive source for the windlass

For large ocean-going vessels, the anchor windlass is predominantly driven by electro-hydraulic or electric systems.

Have a comment about this topic! Share it here!

The post is fill under Troubleshooter page

Troubleshooter
Troubleshooter

I'm the technical person behind the website hydraulicstroubleshooting.com. My website is my portfolio where a share most of my experiences and know-how gain so far in electro-hydraulic systems.

We will be happy to hear your thoughts

Leave a reply

Hydraulicstroubleshooter
Logo