The difference between pressure and force

force and pressure

The difference between pressure and force

Pascal’s Law

Our guidance in hydraulics starts with Pascal. He discovers a Law the Law of Hydrostatic that forms the fundamentals for the entire hydraulics or more commonly name oil hydraulics. 

The principles of hydraulics were been in use in early times, in converting the energy of flowing water into useful mechanical energy by means of a water wheel.

Pascal’s Law states that when pressure acts on a fluid inside a fully enclosed container, the fluid transmits that pressure equally and undiminished in all directions, exerting equal pressure per cm² on every surface in contact with the fluid.

The application of force on fixed area results in pressure whether it comes from a hand, weight, hammer, spring, compressed air, or any combination of forces.

Pressure and force

The main difference is that force describes how strongly something is pushed or pulled. Pressure describes how concentrated that force is over a particular area.

Therefore load acting on different surfaces larger or smaller gives a force accordingly. The force depends on the size of the surface. So, larger surface produces a greater force, while a smaller surface produces a smaller force.

For more in-depth study check my TrainingClound concept regarding hydraulic…

Force

The weight depicted in figure 1 acts a force upon piston surface one. The result of that force is that the liquid in the reservoir is put under pressure.  Surface 2 and 3 are not equal to piston surface 1. The point out here – figure 1 – is to show that force acting on the different surface produce greater or smaller force.

Difference between pressure and force

Have a comment about this topic! Share it here!

The post is fill under Hydraulic-basics

Troubleshooter
Troubleshooter

I'm the technical person behind the website hydraulicstroubleshooting.com. My website is my portfolio where a share most of my experiences and know-how gain so far in electro-hydraulic systems.

We will be happy to hear your thoughts

Leave a reply

Hydraulicstroubleshooter
Logo