Hydraulic repair part 2

hydraulic repair 2

Hydraulic repair crane hoisting motor

A ship crane need service. This time was changing the seal kit of hydraulic crane hoisting motor.

Nowadays I revise my old article and I remember my experiences on board commercial or offshore vessels as hydraulic troubleshooter.

I was going together with a mechanical fitter and carried out inspection of the cranes and repair of hydraulic motor.

For more information about hydraulic browsing Hydraulic Basics page is a click distance

Hydraulic repair job

I traveled and attended to a hydraulic repair job alone but this time I was with a experienced mechanical fitter. Also, I mentioned in my articles that for hydraulic repair on board of vessel for good result is to work with person who has knowledge of hydraulic.

After some difficulties occurred in first days we managed to do a good job.

Important on this job and to be keep in mind that is a narrow place inside the deck crane. Challenges of this job are to find a way to lift big equipment, to dismantle it and change the seal kit. A good rigger is mandatory for this kind of job.

work in progress
work in progress for hoisting crane hydraulic motor seal change
work in progress

Imagine how many chain blocks, hydraulic jacks and also most interesting ways to improvise tools used for this kind of job. Had to be release the mounting bolts for the hoisting winch drum and moved to the left hand side.

The dismantling of outfitting was huge, gratings, hydraulic valve blocks, and also hydraulic lines and hoses.

For a good procedure of removing and changing the seal kit for hydraulic motor of a deck crane just let me know.

In the end the achievement was that the ship crane it has been used to finish the cargo operation without an extra cost of shore/port crane.

Therefore after a week of difficult task for each parties, the hydraulic repair project was finish and everyone was relax.

Have a comment about this topic! Share it here!

Troubleshooter
Troubleshooter

I'm the technical person behind the website hydraulicstroubleshooting.com. My website is my portfolio where a share most of my experiences and know-how gain so far in electro-hydraulic systems.

1 Comment
  1. […] For a good procedure of removing and changing the seal kit for hoisting hydraulic motor of a deck cr… […]

Leave a reply

Hydraulicstroubleshooter
Logo